Drywall | Drywall Supplies | Drywall Delivery

Used for finishing 90 degree outside corners. Suitable for use on any thickness of drywall.

Paper Faced Metal Bead and Trim combines the best of both paper and metal materials to give you straight, problem-free, crack-free corners. The strong paper tape provides excellent adhesion of joint compounds, textures, and paints for a strong, smooth finish. The corrosion resistant metal provides excellent impact resistance. Designed to form true 90° outside corners Crack free corners. Fast and easy installation using joint compound. No extra tools or fasteners required. Superior paper to compound bond eliminates corner chipping.

Used for finishing 90 degree outside corners. Suitable for use on any thickness of drywall.

Designed for 135 degree outside corners. Can be used on any thickness of drywall.

Designed for inside corners offset greater than 90 degrees. For use with any thickness of drywall.

Designed for inside corners offest greater than 90 degrees. For use with any thickness of drywall.

Designed to turn 90 degree corners into a smooth round corner. You will need to set your drywall back 1/2" to achieve this corner.

Designed to turn 90 degree corners into asmooth round corner. You will need to set your drywall back 1/2" toachieve this corner.

Chamfer Bead

Designed for bay window offsets. Used to create a rounded 132 degree offset outside corner.

Designed for bay window offsets. Used to create a rounded 132 degree offset outside corner. To view profiles see the following link:

http://www.cgcinc.com/pdf/brochure/EJC_0J38_19_23.pdf

Patented style designed specifically to make straight, strong outside corner angles. Available in 3" width and manufactured with two 3/4" wide galvanized steel strips laminated to paper tape with a flexible gap between the strips. B1 Beaded Flex has a unique raised bead (nose) in the flexible gap to provide faster, easier finishing with joint compound.

Use where wallboard abuts with suspended ceilings, beams, plaster, masonry and concrete walls, as well as untrimmed door and window jambs.

STRAIT-FLEX® MID-FLEX 300 Paper-Faced Composite Drywall Tape is designed for straightening common irregularities in vaulted ceilings, butterfly vaults, outside 90° corners, off angles, outside corners of bay windows and coffers. It's the perfect solution for outside corners where a large fill or straightening is required. Helps straighten framing irregularities too, plus you can use it to replace damaged metal corner bead.Features and BenefitsMemory-free hinge design allows for ease of installation and straighter corners Printed centre line for easy alignment Diamond-punched edging allows for easier feathering, faster drying and the highest bonding strength Second coat of compound can be applied immediately; very light skim-coat to finish Laminated nose ensures perfect corners without paper fuzz-ups during finishing and sanding Cuts easily with knife or scissors Waterproof and rustproof

“J” trim completely surrounds the rough edge of the wallboard, providing a strong “J”-Shaped and clean corner. Can be used for finishing off bi-fold closet doors, as well as under all door and window encasements, and to finish rough drywall ends.

Comes with a full 5/16" tear-off leg that is one of the largest in the industry. The tear-off leg acts as a guide for the taping knife as well as a protective masking for mudding and painting. When finished, simply tear off the leg for a clean, sharp look.

ULTRAFLEX roll products are ideal for off-angle applications (both short and long runs) and can be used for long columns or soffits. Capable of straightening even the most challenging framing, the wide flange is designed to cover large gaps. Built-in flexible hinge fits any inside or outside corner angle and creates crisp, straight lines.

The chamfered edge softens the room while maintaining the crisp look of a square corner. The rigid vinyl corner is also safer than a sharp square metal corner.

The 350 Chamfer Bead is the same great look of our standard Chamfer Bead in a narrower, more subtle 3/4" wide profile.

Softens corners & adds a contemporary look. Trim-Tex offers the most complete line of 3/4" Bullnose products in the industry

Comes with a full 5/16" tear-off leg that is one of the largest in the industry. The tear-off leg acts as a guide for the taping knife as well as a protective masking for mudding and painting. When finished, simply tear off the leg for a clean, sharp look

The world's #1 flex drywall corner trim delivers perfect straight lines for challenging off-angles and long spans. Straightens poor framing and hides large gaps while withstanding settling, shrinking lumber, seismic movements and temperature variations.

APPLICATIONS:

Long peaks (spans > 10 feet)
Vaulted, cathedral, tray ceilings
Long columns or soffits
Inside/outside drywall corners of any length

FEATURES/BENEFITS:

Extra stiff profile provides easy application for long spans
Wide flange covers large gaps and poor framing
Built-in flexible hinge adjusts to fit any inside or outside corner angle
SLAM™ corner design ensures strength, durability, labor and material savings, and eliminates costly callbacks

Adjustable Inside Corner produces over 20 million ft. per year of the straightest, sharpest inside lines that no taped corner could match. Unique design allows it to adjust from a 70 degree inside corner to a 150 degree inside corner.

1-844-379-9251

PRODUCT CATALOGUE - CORNER BEAD

Your Cart